PocketWizard Pocketwizard Flextt5 Transceiver Radio Slave For Nikon Remote Transmitters & Receivers

The Dedicated Flextt5 Transceiver, With Its Built In Hot-Shoe And Controltl™ Software, Is The Perfect Addition To Canon E-Ttl Ii Flash Systems. The Flextt5 Takes The Existing Benefits Of Canon Wireless Systems And Pushes Them Past The Boundaries Of Infrared Technology. When Paired With The Mini Tt1™ Transmitter Or Another Flextt5 Transceiver, A Whole New World Of Wireless Flash Freedom Opens Up. The Flextt5 Is Also The Perfect Transceiver For Your Manual Triggering Needs And Works With All Multimax Channels And Many Of The Multimax Advanced Functions.

The Flextt5’S Simple Design Comes To Life Through Its Hot-Shoe Connection With A Camera Or Flash. The System Tracks Your Changes In Iso, Shutter Speed And Aperture And Reacts Accordingly To Make Sure Exposures Stay Right On Target. Use The Flash Compensation Dial On Your Camera Or Flash Just As You Would Normally And The Changes Pass Seamlessly Through The System.

The Flextt5 Has Two Channel Configuration Settings; C1 And C2. †Each Can Be Programmed As Needed With Up To 20 Controltl Channels For Ttl Photography, Or 32 Standard Channels For Manual Flash Photography.† The Flextt5 Transceiver Also Has A Three-Zone Selector Switch For Ease Of Use With Canon Zones And Ratios.

With Pocketwizard’S Hypersync Technology, The Flextt5 Can Advance The Timing Of Your Flash Trigger Precisely So Increased Flash Sync Speeds, Up To 1/500Th Of A Second, Can Be Achieved With Many Strobes.

Need More Speed? Push Your Controltl System Beyond 1/500Th And Go Into Fp/High-Speed Sync Mode Automatically. No Buttons To Press Or Settings To Change Other Then Your Shutter Speed Will Give You Flash Sync All The Way To 1/8000Th.

A New Pocketwizard Utility Program Is Provided To Support The Flextt5 Transceiver Via A Usb Port.† The Utility Allows You To Configure Your Channel Settings, Dial In Your Hypersync Timing, Adjust Your Sleep-Mode Timers As Well As Update Your Product To The Latest Firmware.

The Flextt5 Also Has Our Auto-Sensing Transceiver Technology That Enables It To Switch Back And Forth Between Transmitter And Receiver Modes As Needed For Greater Flexibility On The Job. When A Hot-Shoe Or Other Trigger Is Detected, It Automatically Switches To Transmitter Mode.† With Auto Relay Mode You Can Easily Trigger A Remote Camera In Sync With Remote Flash. Put A Camera Where You Can’T Be And Have Remote Ttl Or Non-Ttl Lighting At The Same Time. Expand Your Coverage And Increase Your Creativity.

Key Features

• Wireless Autoflash With Canon Ettl Ii And Nikon Ittl
• Use On Camera Or With Ttl Flash For Autoflash Operation
• Direct Mounting To Camera Or Flash. Plus Ports To Use Standard Cords
• A-B-C Zone Select For Canon And Nikon Ratio Flash
• Pocketwizard Radio Signal Performs Around Corners, Behind Walls, In Bright Sun
• Works With All Pocketwizards On All 32 Channels And Zones
• Fp/High-Speed Sync Up To 1/8000; Hypersync Up To 1/500 Sec
• Up To 800Ft For Ttl And 1200Ft For Standard Triggering
• Wireless Remote Ttl Up To 8Fps
• Simultaneously Triggers Ttl And Standard Flash
• Usb-Computer Programmable And Upgradeable